德国JDT可旋转吊点TP-F型,旋转吊环

德国JDT带有内置螺纹的新型产品（可旋转吊点TP－F型）

THEIPA Point-F
-包含所有THEIPA Point系列产品的优点。
-原则上内置螺纹长度是其口径的1.25倍。
-标注承载能力为倾角90°时的极限工作载荷。
-应使用10.9级并经过裂纹检测的螺栓。
-除表格中常见尺寸外，可提供您所需要的其它特殊尺寸。
The THEIPA Point-Fwith an internal
Thread has beennewly included in the range.
-All of the THEIPA Point’sadvantages thve also been considered in this case.
-The thread’s detth is 1.25 times its diameter as a rule.
-The stamped WLL applies to the kind of attachment by 90°.
-Bolts of the quality class 10.9 crack-tested are permitted as connecting elements.
-Different threaded versions and lengths can be suoolied on request.

在非均匀对称起吊情况下，视双肢或3/4肢链条的极限载荷等同于单肢链条90°时的极限工作载荷。
In the case of an unsymmetrical load distribution,the lifting capacities applicable to the 2 and 3/4-leg slings are the same as for 1-leg types at 90°

上一信息：德国JDT可旋转吊点TP型,旋转吊环

下一信息：德国JDT可旋转吊点TP-S型,旋转吊环